Yesterday we wrapped up our AIARE 1 Avalanche Course with a field trip into the Gulf of Slides on the east side of Mount Washington. The weather was fantastic and looks to staying that way for the next 48 hours. I’m catching up on some home chores today but will be heading back into the alpine tomorrow! Here’s a quick run-down of our tour yesterday.
The skinning was good until about 4400 feet where holding an edge on the traverse got a bit tricky. I was happy to have my Dynafit Ski Crampons along and will be posting a thorough review of those very soon!
It wasn’t too crowded, we saw perhaps 20-30 people up there. The 48 hour forecast is for more low wind bluebird conditions so I’m heading back out tomorrow with a plan to ski from the summit. Hope you can get out and enjoy! I think our Spring ski season is going to be quite good this year!
New to Back-country Skiing? I do teach the following courses
Former AIARE students of mine get a 10% discount on these courses! Just message me directly through Instagram or Facebook for the discount code and let me know what date you want to go!
I’ve recently upgraded and added to my ski mountaineering gear and upcoming reviews will be focused on ultra-light gear designed specifically with back-country skiing and mountaineering in mind. Look for these reviews to come out soon!
This winter I extensively tested 3 of the best lightweight climbing skins available. Each skin was tested in variable conditions from super cold snow (-11 degrees Celsius) to Spring corn (0 degrees Celsius). Testing included steep skinning up to 30 degrees head on to kick turning up 40 degree terrain. Most testing occurred on Mount Washington and in the Tröllaskagi Penisula, Iceland. To better compare glide and grip I often went out with one model on one ski and another model on the other. Below are my opinions on these models.
This is the lightest and most pack-able model I tested. Installing the toe clip is a little involved but I was able to do it in less than 30 minutes. The 65% mohair and 35% nylon blend strikes a solid balance between grip and glide and I didn’t notice any issues with either characteristic. The glue is super sticky and when redeploying after folding them together it took a little more effort to separate the skins but not enough to be worthy of a negative mark. They are the softest and most fold-able skins I tested which make them extremely pack-able. The STS tail was very secure but I decided to trim the rubber adjustment belt as it felt overly long.
Right out of the box I love how these come in custom lengths and needed no adjusting to fit my skis. The included G3 Trim Tool is a work of art and the only tool I use to trim skins. These had the best glide in cold temps and fair grip in challenging skinning conditions. The glue iced up a little on a couple tours but they were still fully functional throughout. The tip connector is probably the best out there as it self adjusts to fit the shape of your tip perfectly. The tail connector however is my least favorite part of these skins as it would pop off my rocked DPS Wailer 99’s repeatedly. I’ll most likely remove it next season and use these without a tail connector or order a twin tip connector kit.
Pros: Out of the box fit, excellent glide in cold snow
Contour uses a 70/30 mohair/nylon mix in their hybrid skins that require the tip clip to be installed before use, much like the Black Diamond skins. Set-up took less than 30 minutes. These had the best grip of the three models I tested but less glide (that’s usually the toss up with skins). Both the tip and tail connectors were very secure and the glue performed well in all test runs. I did notice a very strong odor from these skins the first few times I used them that is finally starting to abate.
Pros: Best grip, coolest graphic!
Cons: Less glide than others tested, but not a deal breaker!
Weight* 582 grams
So which ones are right for you? I found all three to be great for the category but it comes down to what you want most out of a climbing skin.
A new pair of skis arrived on Friday just in time for the last avalanche course of the season! I wanted to put together a setup that would crush uphill performance (be insanely light) but also give me enough control for decent downhill performance. While I’ve only had one tour on this kit it was a good one, up Ammonoosuc Ravine Trail, summit Mt. Monroe, and down Monroe Brook, I want to share some first impressions. A detailed review will follow once I put some more field time on them in Iceland in two weeks!
A proven shape (125/99/111, Radius: 16-19m) with the Tour 1 construction makes this an uphill skinning beast. Seriously each ski only weighs about 3 pounds! The feather-lite weight is achieved by using a balsa wood core but dampening and downhill performance is obtained due to the carbon/glass laminate and on both sides of the core. The top of the ski is protected with a Prepreg carbon fiber laminate and the bases are hard World Cup race bases. The combination of these material ends up with a ski that is surprising torsion-ally rigid and responsive despite belonging to the “ultralight” class. For comparison my Dynafit Denali skis feel a little softer than these at a comparable weight. I’ll wait to comment on the amount of “chatter” until I get a chance to bring them up to speed but typically that is an issue when rocking an ultralight ski.
I’ve always liked my Dynafit Tech Bindings and this is the lightest binding I have ever committed to. Weighing only 13 ounces and carrying up to a 10 DIN rating and two level quick step climbing bars along with being compatible with my ski crampons it seemed like a perfect match for this ski (and this boot I’m about to explode about). For those who are curious I set my DIN to 8 (180 lbs, Type 3) and had no accidental releases on my tour this past weekend. I haven’t crashed with them yet and it might be awhile before I truly test the release as I tend to ski a little on the conservative side when on lightweight back-country gear.
This really is the game changer in my opinion! A boot that feels like it can ice climb Grade 3 water ice in absolute comfort, skin for thousands of vertical feet, and perform on the downhill in steep terrain with good conditions and in lower angle terrain in more challenging conditions. It’s literally the first ski boot I ever felt I could drive my car in. In touring mode it feels as comfortable as a Scarpa Inverno or Koflach Degree mountaineering boot. In ski mode it gave me enough confidence to link turns in variable snow conditions while descending Monroe Brook (max pitch 42 degrees). I felt one pressure point on the inside of my ankle bone during our descent when I was “cranked tight” that I plan on addressing by molding the liners. I’ll get more into the fit in my full depth review next month after many more days of touring but for now the size 27 fit my US size 9 feet like a comfy pair of slippers (except for that one pressure point I’ll be working on).
I have tested these extensively all winter long and have experienced overall positive results. They’ve gripped well in a myriad of conditions that I will spell out in more detail in my in-depth review next month. I absolutely loved how well they fit out of the box and the G3 trimming tool (included) made cutting them to size a snap. My only minor gripe is the heel clip rarely stays attached on the rounded rocker shape of DPS tails. Not a big deal considering they work fine even when that comes un-clipped.
My first ski crampons and they definitely made a difference on the steeper bits of the Ammonoosuc Ravine Trail. Almost everyone in our course who didn’t have them opted to toss the skis on the back and boot up the steeper half mile to treeline. With the included stuff sack this extra 8 ounces adds a lot of security when the skinning gets steep & icy!
This entire setup up; skis, boots, bindings, skins, and crampons only weighs 14 pounds and 12 ounces!
Hey you’ve read this far so here’s a video of our tour last weekend on the west side of Mount Washington!
I’m watching the weather in Iceland almost daily. Assuming Spring skiing conditions this will be my kit for that trip where we have a solid 3-4 days of touring planned. My ski season used to end when I couldn’t ski right to the parking lot at Pinkham but with this ultra-light setup I plan on making quite a few more forays up the hill and stretch my ski season out to May this year. When gear is this light and comfy I don’t think I’ll mind much tossing it on the back for a mile or two. If you are looking to lighten your load take a look at the links above. I think this is a pretty well optimized corn snow and soft snow setup when you spend a fair about of time earning your turns, and I really can’t wait to get these boots up an alpine gully this Spring (My Petzl Vasak crampons fit perfectly!)
Thanks for reading! A lot more reviews coming an quite a few gear give-aways planned for next month so if you haven’t already please follow this blog at the top right! You can also follow on Facebook, Instagram, and Twitter!
See you in the mountains,
Northeast Alpine Start
Disclaimer: The boots and skins listed above were provided for purposes of review. The skis and bindings were purchased with my own money. All opinions above are my own. Affiliate links help support this blog.