I’ve been wearing the Black Diamond Alpine Softshell pants almost daily for the last 5 months and have been really happy with their performance. A true three season pant I’ve worn them on sunny low 70’s days rock climbing on Whitehorse Ledge, blustery Mount Washington ascents (including my two hour car to car of Pinnacle), late season ice climbing, and summer alpine climbing in the Cascades. These were the only pant I wore for successful summits of Mount Shuksan, Forbidden Peak, and Mount Rainier. All told they have seen over 200 miles of hiking and 30,000 feet of climbing and still look and perform great! Let’s take a look at why these are suitable for such a wide variety of adventures!
Probably the best feature of these pants is how they have a very large range of temperature comfort. This is primarily achieved by Black Diamond’s proprietary four-way stretch fabric (88% nylon, 12% elastane) with a DWR finish. The material is soft enough on the inside that it feels great on bare legs and so breath-able that I could wear them on high humidity warm days during bug season without any discomfort. I actually found myself not climbing in shorts this season because I liked the added protection of a full pant like this pretty much every time I headed into the woods. Despite being so comfortable in warm and humid conditions the DWR treatment and weight of the material offered enough protection for them to be perfect in blustery alpine climbing conditions. I wore them exclusively for all three summits mentioned above and they were perfect even for our 1 AM below freezing alpine starts. A lightweight or mid-weight long underwear pant can easily expand the cold weather capabilities of these though I would pack a hard-shell to zip on over them in extreme cold/windchill/wet conditions.
Author wearing the pants at 11,000 feet on the Ingraham Glacier during crevasse rescue practice- photo by Alexandra Roberts
Comfort- Sizing/Fit
The second best feature of these pants is how well they fit. For reference I am 5′ 9″, 180 pounds, with a 34 inch waist and 32 inch inseam. I went with a size medium and they fit me quite well. They may be an inch long in the inseam but that is only noticeable if I am wearing flip-flops. Once I have trail shoes or boots on they do not feel too long at all and the stretchy material makes rolling them up around the calves for rock climbing super easy. The stretchy material also stays in place around the calf while I am climbing while other pants sometimes un-roll on me mid-pitch if I don’t fuss with a good “tight-roll”. There is also a hem-cord at the ankles that can help keep them tight around your boot or calf with just one pull.
These offer protection in quite a few ways. They are light enough to serve as bug/poison ivy/pricker protection in warm weather. They are durable enough to protect bare legs from rock abrasion while scrambling and climbing. They are virtually wind proof to guard from wind-chill (though I would add a hard-shell pant to my pack if looking at a wind chill advisory). They are water-resistant enough thanks to the DWR coating to deal with light precipitation and when they do get wet they are super quick drying. If glissading on Spring snow is on the agenda I would also add a hard-shell to the kit.
I really like the integrated adjustable web belt and have not had any need to wear an additional belt but low profile belt loops are included anyways. The pant fits great underneath the two harnesses I used with it, the Petzl Sitta (reviewed here) and the Petzl Altitude (review coming). Two zippered hand pockets are perfectly positioned and a zippered right thigh pocket is large enough for my iPhone 6s Plus in its Hitcase Shield waterproof case <- great iPhone case by the way! There is also a zippered right rear pocket to round out the features of this pant.
Summit of Mount Rainier, July 27th, 2017- photo by @cfphotographyThe author on some late season ice last March begins testing the Black Diamond Alpine Softshell Pants- photo by @cfphotography
Summary
While I wore these for almost 5 months it was the two weeks that I lived in them in the Cascades that really won me over. Light enough to sleep in yet rugged enough to handle thousands of feet of alpine scrambling. I will likely be wearing these regularly for the rest of the New England Fall climbing season and they will probably go out on some fair weather ice climbing days this winter, though I have a couple heavier soft-shell pants that need to be reviewed this season as well. If you are in need of a versatile climbing pant backed by a great company this model deserves a very close look!
Disclaimer: This product was provided to the reviewer for purpose of review and all opinions expressed are genuine. All product links above are affiliate links. Using those links to make a purchase supports Northeast Alpine Start at no additional cost to you.
The Black Diamond Alpenglow Sun Hoody is another great addition to the growing market of sun hoodies. This category has become a year-round staple of my outdoor wardrobe, especially as we enter the Northeast black fly season. Having a sun hoody means you can go lighter on both bug repellent and sunscreen and if you haven’t tried one yet I strongly recommend you pick one up!
Black Diamond Alpenglow Sun Hoody – photo from blackdiamondequipment.com
A technical fit paired with a highly protective fabric, the Black Diamond Alpenglow Hoody offers coverage on desert multi pitches, high-alpine approaches and hot crag sessions. With 50-UPF and moisture wicking fabric, you can add a layer of protection to your arsenal, and an under-the-helmet hood and pullover design add comfort.
50-UPF sun protection
Underam gussets
Under-the-helmet hood
Fit: Slim
Size: S-XL
Comfort
The Black Diamond Alpenglow Sun Hoody is made with a very thin polyester stretch material ((140 gsm, 91% polyester, 9% elastane). It feels great on bare skin and I’ve worn it over a thin synthetic t-shirt, a medium weight collared Black Diamond Technician Shirt, and by itself all with equal comfort. The material is so light and breathable it truly feels cooler in the sun with this on then just wearing a t-shirt. When combined with my Black Diamond Alpine Start Hoody that I reviewed here my torso is covered for about 90% of the weather I find myself climbing in from May through August.
The author testing the Black Diamond Alpenglow Sun Hoody on Whitehorse Ledge- photo by @alexandraroberts
Fit
While Black Diamond claims this has a “slim” fit I found it a bit bulky. For reference I am 5’9″ 180 lbs and I went with the size large based on my chest size of 42 inches. I think a medium would fit me better but the large works. The forearms are snugger than other models I’ve tested in this category and I prefer that style for rock climbing. Black Diamond also claims this has a “under-the-helmet-hood” but it is sized rather roomy and can easily fit over or under my helmet. Over a bare head the hood feels a little to large but felt comfortable if I had on a ball-cap. I would wear the hood under my helmet when the bugs are biting and over my helmet for slightly better airflow on really hot and humid days.
Hood options- Black Diamond Alpenglow Sun Hoody Review
Versatility
The Black Diamond Alpenglow Sun Hoody only weights 240 grams (8.5 ounces). When I combine it with my Black Diamond Alpine Start Hoody that I reviewed here the total package is about one pound but covers the vast majority of weather and bug conditions I climb in. At a combined weight of one pound there is no reason not to bring these two pieces of added protection even when the forecast is for comfortable climbing conditions. It’s just cheap insurance for when the crag is a bit windier than you expected or you find yourself still out at dusk and the mosquitos decide to feast. And if you’ve never tried a sun hoody your will be quite impressed the first hot day you pull it on and realize it is cooler than not wearing one!
Convenience
One feature not mentioned in the manufacturer description is the fact that the material has been treated with Polygiene which basically eliminates odor and reduces the amount of washing’s this piece needs. I personally do not wash my high end outdoor clothes with every use as washing will reduce the lifespan of your outdoor clothing. Other than under garments (which do get washed almost every use) I typically wear items like this 7-10 hard use days between washing. I’ve worn this piece for 8 days straight and it is has not picked up any noticeable odor. You can read more about how this technology works here.
Summary
A sun hoody should be on every climber’s wish list. From cragging to alpine, sport to trad, and even casual hikes and trail runs, this is a super versatile piece and a must have staple to every outdoor wardrobe. Black Diamond has entered the market with a solid contribution to the style with the Alpenglow Sun Hoody and you should check it out!
The La Sportiva Tech Gloves are another great option in the growing category of technical gloves designed for mountaineering, ice climbing, and mixed climbing. For this review we had guest reviewer, AMGA certified Rock Instructor, and all around sender Justin Guarino, test these over ten hard days of ice climbing and mountaineering in the White Mountain Region. Here is his take on this technical alpine glove!
La Sportiva Tech Glove Review- photo from lasportiva.com
The Good
Warm even when wet
Excellent dexterity
Slip Resistant Grip (great of ice climbing)
The Bad
Durability
Odor
Slow to dry
The Verdict
I was very pleased with these gloves and there performance was top notch. The test consisted of a few weeks of steep ice and mixed terrain as well as times of idle inactivity whilst coaching students. Through the entirety of the test my hands were as happy as they could be in the sub freezing daily temps. Easily clipping gear while running it out on grade 5+ waterfall ice and placing cams was never difficult on sketchy stances while sending steep mixed corners. From the onset I took the approach of looking at this glove as a contender for multi day alpine walls in Alaska this spring; I have to say I would take them with me on this death defying terrain were a glove can make or break you.
Justin starts up the crux pillar of the classic Grade 5 ice route Repentance
The Details
Warm when wet:
This is critical and they performed excellent. My hands get sweaty… maybe because I’m always scaring myself. With that said wet from the inside wet from the outside (dripping ice and snow) doesn’t matter they did the job. Truly a pair of gloves that you can start and finish the day with. That in itself merits buying them for they simplify your selection. One and done get after it!
Excellent dexterity:
Given that I often venture into strange terrain, terrain where you better be able to get gear in and not fumble your crucial equipment. I have to say that given the level of insulation the dexterity of these gloves was astounding.
Slip resistant:
This is a crucial trait of an alpine glove and they delivered! Designed to perform and it showed. No fooling around. Its life or death at times up they. Not once did I pull these gloves off with my teeth in a panic and spit them out! I’ve done that before with other gloves and was glad I didn’t have to!
Durability:
You can’t hold it against La Sportiva. If you climb as much as I do you don’t expect these things to last… and they won’t. 10 days on them and I probably have 10 days life left in them. I am a professional and use them at a professionals level of activity so like I said I didn’t expect them to last. (Editor’s note: 20 days of hard use might translate to 1-2 seasons for us weekend warriors).
Odor:
I mean come on all gloves smell bad. But these in particular produced a particular offensive odor. I suppose I need to dry them out better. But who has the time… Climb climb climb! (Editor’s note: I’ve noticed this with most gloves and the only resolution is a good glove/boot dryer! This is the one I use everyday and it is amazing!)
Slow to dry:
Lots of insulation but once the water gets in there it stays. They are still warm but you better believe that makes me nervous especially in sub zero temps. Again they are gloves what do you truly expect. All said they are a great buy.
Justin finding some alpine conditions on Mount Webster’s Shoestring Gully
Thanks you Justin for sharing your feedback on these gloves! If you would like to give these a try you can find a pair on Amazon here or Backcountry.com below!
Disclaimer: La Sportiva provided a sample of these gloves for the purposes of this review. The opinion expressed above are solely of the tester. Affiliate links help support this blog.
The Black Diamond Helio Shell Jacket is a bombproof technical super light three layer hard shell suitable for everything from hard ice climbing to alpine touring and Skimo.
DEAL ALERT! Currently 40% off on Backcountry here!
Over the last 3 months I have tested this jacket climbing above tree-line on Mount Washington, leading Grade 5 waterfall ice, and taking laps on the Sherburne ski trail. Its versatility and durability combined with its extreme pack-ability make this a solid contender in best hard-shells of 2016/17.
The Black Diamond Helio Shell Jacket uses GORE-TEX® 3L, 30d nylon plain-weave face with nylon C-Knit™ backer and DWR (95 gsm, 100% nylon). The nylon C-Knit™ backer supposedly creates a “quieter construction”. While it may feel a little softer than an old stiff style GORE-TEX® jacket it definitely does not feel like a soft-shell jacket, but that is a sacrifice one makes when they want 100% water and wind proof protection. After a few thousand feet of back-country skiing, a half dozen or more ice pitches, and 2-3 days above tree-line on Washington the jacket is showing virtually no signs of wear.
Weight/Pack-ability
Hard shell protection at less than a pound!
Definitely one of the key features of this streamlined jacket is how light and small it packs. Black Diamond lists 370 grams for a size medium. My size large was 386 grams, or 13 5/8 ounces. I could crush the piece down to about a 6 inch by 6 inch by 3 inch package, easily small enough to forget about it in your pack until that snow switches over to freezing rain or the next pitch climbs out a drippy shower-fest.
The Black Diamond Helio Shell Jacket is designed to be worn with a harness and omits hand pockets to save weight and increase pack-ability. While Black Diamonds size charts put me in a size large I would definitely prefer a size medium in this piece. For reference I am 5′ 9″ 180 pounds with a 42 inch chest. The large has a lot of space in the chest and I feel it would better fit a 44+ inch chest or someone closer to 200 pounds. Sleeve length was slightly long on the large but could be shortened with the Velcro wrist straps. Length was perfect for tucking into my harness and the hood easily fit over my ski helmet. Plenty of room in the shoulders for long reaches over the head. A medium would be perfect for me.
Features
The Black Diamond Helio Shell Jacket sports a streamlined minimalist design to keep the weight down and the pack-ability up. Full length pit zips, two large chest pockets, velcro cuffs, and an innovative and effective “Coheasive” single pull draw-cord system at both the hem and the hood leave little to talk about here, and that’s ok. The alpinist or skimo customer this jacket is designed for is not looking for a ton of bells and whistles. This shell has what it needs and nothing it doesn’t.
Summary
I’ll admit I am often reluctant to pack a hard shell jacket on most my adventures. I prefer the superior breath-ability of soft shell jackets for the high output sports I pursue. However having the hard-shell packed away as a piece of insurance is a wise move when conditions change and things become a bit wetter or windier than you were expecting.
The extreme pack-ability and less than a pound specifications of a true hard-shell make the Black Diamond Helio Alpine Shell a solid piece of insurance to carry on just about any mountain adventure.
DEAL ALERT! Currently 40% off on Backcountry here!
Disclaimer: Black Diamond provided the sample for the purpose of review. The opinions above are solely mine. Affiliate links above help support this blog.
The Big Agnes Dunkley Belay Jacket is the lightest synthetic belay jacket I have tested this season that also competes well in the heat retention department. I previewed this jacket back in November and now that I have tested it above treeline on Mount Washington and while hanging at icy cold belays while ice climbing throughout the White Mountains I am ready to share some more first hand opinions on this piece.
Big Agnes Dunkley Belay Jacket Review- Photo by Brent Doscher Photography
Let’s start with the most important feature:
Warmth
The Big Agnes Dunkley Hooded Belay Jacket uses 120g of Pinneco Core™ fill in the body and 80g in the sleeves. This “feels” warmer and puffier than the Primaloft ECO insulation used in other jackets I am testing and has decent compress-ability. I wore this over my typical soft-shell and Merino wool layers on Mount Washington in 60+mph winds with wind chills hovering around -40 degrees and was very pleased with the protection it offered. Yesterday after topping out a remote back-country Grade 5 route off the Kancamagus Highway I was grateful for the full enclosure insulated hood while I was stationary and exposed belaying both a photographer and my partner for the better part of a windy hour. Here’s some video from that climb:
Shell
Big Agnes does not list much detail in relation to the shell fabric, just: “100% recycled polyester shell is wind-proof and water resistant”. I have reached out to Big Agnes for more info and will update this as soon as I hear back! That said I found it fully windproof. It is likely there is a DWR treatment on the fabric as climbing under a drippy chandelier of ice a week ago the jacket did not take on any moisture.
24.5 oz. / 695 grams. The lightest option in this seasons line up of synthetic belay jackets this piece easily stuffs into an included high quality 10 x 7 stuff-sack. Oddly the manufacturer’s website description references an interior chest pocket that doubles as a stuff sack but I believe this must be a web error as there is no interior chest pockets and the exterior chest pocket is far to small to function as a reversible stuff sack.
Fit
I went with a size large for my 42 inch chest and it fits great over my typical load out. The adjustable hood is the perfect size for my helmeted head. Arm length is slightly shorter than similar models and the back length feels slightly shorter, which works well over my climbing harness. If in doubt consult the manufacturer’s size chart!
Features
Center front zipper includes interior no-draft flap and a zipper garage at chin
Features YKK Reverse coil zippers
Textured zipper pulls are easy to use with gloves
Adjustable drawcord at hem seals out wind
Two zippered hand-warmer pockets with zipper garages
Large interior mesh pockets for extra stash space
Exterior check pocket
Separate stuff sack included
120g Pinneco Core™ synthetic insulation in body, 80g in the sleeves
Insotect Tubic™ construction provides supreme loft and thermal efficiency
100% recycled polyester shell is wind-proof and water resistant
Jacket weight, size Medium – 24.5oz/ 695g
Summary
The Big Agnes Dunkley Belay Jacket is a solid choice for a synthetic belay jacket, a must have item in every ice climber/mountaineer’s kit. I like the high visibility yellow but it also comes in a visible bright blue if yellow isn’t your thing. It comes in black too but I would not recommend that color for a belay jacket (bright colors are happy colors when you are freezing your tuchus off). If you’re in the market for a solid performer in the belay jacket you can pick this one up here at a great price.
See you in the mountains,
Northeast Alpine Start
Disclaimer: Big Agnes provided Northeast Alpine Start a sample for this review and the product has been returned to the manufacturer. All opinions stated above are my own. Affiliate links above support this blog.
A couple months ago I got my hands on the iconic Patagonia Nano Puff® Hoody and I’ve come to discover why I often see climbers milling about both at the cliffs and at the local coffee shop in this well designed piece. The non-hooded version of this jacket won the Editors Choice Classic Award from Climbing Magazine. I prefer hoods on almost all my outdoor clothing so I was happy to review the hooded version. This jacket falls into the “light puffy” category. If you are looking for a full on winter belay jacket you can check out some “full puffy” models I am reviewing here.
Patagonia Men’s Nano Puff® Hoody- photo from Patagonia.com
So let’s break down what makes this piece an excellent addition to your outdoor wardrobe!
Insulation
The Patagonia Nano Puff® Hoody uses super light and compressible 60-g PrimaLoft® Gold ECO Insulation. “Gold” Primaloft is the highest level of synthetic insulation and of course being the environmentally conscious company Patagonia is known for they went with the ECO version of Gold which is 55% post-consumer recycled content. So you can feel warm and fuzzy while feeling warm and… ok that’s a bit too cheesy.
The “brick quilting” pattern is superior to other less expensive baffling methods and keeps the insulation in place preventing cold spots.
Shell/Lining
The Patagonia Nano Puff® Hoody uses 1.4-oz 22-denier 100% recycled polyester with a DWR (durable water repellent) finish. Well what does that mean? 1.4-oz 22-denier feels like silk!
Brick Quilting Pattern = no cold spots
This isn’t a cheap nylon taffeta but a very abrasion resistant and pack-able material. It is quite comfortable over bare skin which is good since I broke this out repeated this Fall to wear directly over a t-shirt.
Weight/Compress-ability
12.8 oz. / 362 grams. Ultralight weight and super compressible, this is undoubtedly where the jacket go its namesake. Nano in this sense means extremely small. The Patagonia Nano Puff® Hoody easily stuffs into its own internal chest pocket which measures about 8 x 7 x 4 inches.
A lot of warmth in a small little package
A carabiner sewn loop allows you to clip this off to the back of your harness if you are leaving your pack on the ground and the top of the pitch looks a little bit more breezy than the base of the route.
Sizing/Fit
I found the sizing to be spot on. I went with a large which fits my 42 inch chest with a little extra space for a soft-shell and base-layers but not too baggy to throw on over a t-shirt. The hood is sized to fit under your helmet but I found it would fit over as well, but a bit snug.
A blustery day rock climbing this Fall near Gorham, NH
Probably more comfortable, and warmer, to wear this hood under your helmet unlike traditional belay jackets with over-sized hoods.
Features
Rounding out some of the features I haven’t mentioned yet:
Center-front zipper has wicking interior storm flap and zipper garage at chin for next-to-skin comfort
Two zippered handwarmer pockets have cleanly finished zipper garages
Under-the-helmet hood construction is light and simple
Drawcord-adjustable drop-tail hem seals in warmth
Summary
This is a super versatile layer that can serve many purposes.
It’s the perfect balance of warmth, weight, and pack-ability for climbing on the edge seasons.
Fall rock climbing is the best rock climbing in the Northeast and this jacket is ideal as your insulating layer all on its own. The DWR finish and warm-when-wet insulation adds protection should you leave the rain shell at home and get surprised by a later afternoon shower. After the leaves have fallen and the ice is starting to grow this becomes an excellent mid-layer, taking the place of heavier and less compress-able 200 weight fleece jackets. With quality long underwear, a soft shell, Patagonia Nano Puff® Hoody, and a hard-shell you have an adjustable system that can handle almost any winter conditions. I’ll still carry a heavier full on belay jacket when swapping leads ice climbing but for fast solo missions this is a perfect companion!
If you think you’d like this jacket you can find it at Backcountry. If you liked this review please leave a comment below and subscribe above!
See you in the mountains,
Northeast Alpine Start
Disclaimer: Patagonia provided this item for purposes of review. The opinions expressed above are my own. Affiliate links above help support this blog.
This winter I’ve acquired a number of high end synthetic insulated belay jackets to review. Getting field time to fully test all five of these models will take a little time so I decided to post a first look comparison of these industry leading models so those shopping for a new belay jacket for this season will have some info to look at before the ice climbing season really gets underway. Below I will share some technical comparisons within the various models and some impressions of each. Full reviews of each model will be posting throughout the season and I will back-link here as they publish.
First let’s define the category here. The common definition of “belay jacket” should look something like:
belay jack·et
bee-lay ˈjakət/
noun
1.
an outer garment extending to the hips with sleeves and a fastening down the front. An insulated hood and dimensions to fit over all other layers make a belay jacket stand apart from regular jackets. Also known as a “Puffy”.
I am going to limit this comparison to synthetic insulated options… apples to apples so to speak.
We will compare insulation, shell material, weight, fit, and features of each piece specifically trying to pull out how they differ from each other. Keep in mind this is not intended to be a full review of any of these jackets as that will need to wait until each has been sufficiently field tested. Here we go!
The LaSportiva Latok 2.0 uses Primaloft ECO Silver insulation. LaSportiva states they use “Body-mapped construction of 3 different weights of Primaloft used for thermal regulation”. I reached out to LaSportiva for more details and discovered they use 200 grams in the body, upper sleeves and shoulders have 133 grams, and lower sleeves have 80 grams.
Shell
10-Denier Ripstop (100% Nylon); Repeloff Nano Super DWR; Upper Body, Shoulders, and Sleeves: X2Weave-BR (85% Nylon, 15% Spandex); Repeloff Nano Super DWR
Weight/Compressability
29.3 oz. / 831 grams. This is the 2nd to heaviest model in the line up. It doesn’t feel very “crushable” for packing, and I’m assuming that may be due to the more cost effective Primaloft ECO insulation and regular (heavier) YKK zippers used throughout.
Fit
This model has the most snug fit of all the models I am testing. It’s a bit tight in the shoulders and the hood is just big enough to fit comfortably over my helmet.
Features
The jacket is black, not my first choice in belay jacket color. Bright colors have a physcological effect when waiting out a storm or your partner takes a decade to lead the next pitch while you slowly turn into a popsicle. It also has a microfleece lined adjustable hood that fits over my helmet, albeit a bit snug. Rounding out the feature list: 2 Front Hand Warmer Pockets with Invisible Zippers, 2 Napolean Chest Pockets with YKK Zippers, 1 Inner Binded Phone Pocket with Headphone Access Port (fits iPhone 6 but not 6 Plus), 2 Large Inner Mesh Pockets, Adjustable drawcord at hem
The Big Agnes Dunkley Hooded Belay Jacket uses 120g of Pinneco Core™ fill in the body and 80g in the sleeves. This “feels” warmer and puffier than the Primaloft ECO insulation used in the previous jacket and is 5 ounces lighter.
Shell
Big Agnes does not list much detail in relation to the shell fabric, just: “100% recycled polyester shell is wind-proof and water resistant”. I have reached out to Big Agnes for more info and will update this as soon as I hear back!
Weight/Compressability
24.5 oz. / 695 grams. The lightest option in our line up this piece easily stuffs into an included high quality 10 x 7 stuff-sack. Oddly the manufacturer’s website description references and interior chest pocket that doubles as a stuff sack but I believe this must be a web error as there is no interior chest pockets and the exterior chest pocket is far to small to function as a reversible stuff sack.
Fit
This model fits well over my typical load out. The adjustable hood is the perfect size for my helmeted head.
Features
Center front zipper includes interior no-draft flap and a zipper garage at chin
Features YKK Reverse coil zippers
Textured zipper pulls are easy to use with gloves
Adjustable drawcord at hem seals out wind
Two zippered hand-warmer pockets with zipper garages
Large interior mesh pockets for extra stash space
Exterior check pocket
Separate stuff sack included
120g Pinneco Core™ synthetic insulation in body, 80g in the sleeves
Insotect Tubic™ construction provides supreme loft and thermal efficiency
100% recycled polyester shell is wind-proof and water resistant
The Black Diamond Stance Belay Parka uses two layers of 80 gsm PrimaLoft® Silver Hi-Loft Insulation insulation (basically 160 gsm), a continuous filament insulation made with fibers of differing thicknesses. Primaloft calls this their loftiest insulation and it definitely feels up there with the best synthetic insulation currently available.
Shell
This piece uses Pertex® Classic 40d plain-weave with a DWR finish (65 gsm, 100% nylon). I’ve always found Pertex® to be a solid performer in the breathable water resistent category so I’m happy to see Black Diamond went with this for the shell material. Interestingly the liner also has a DWR finish to it which I suppose is one extra layer of protection, Pertex Microlight 20 d ripstop with DWR finish (40 gsm, 100% nylon)
Weight/Compressability
26 oz. / 730 grams. This is the 2nd lightest model in the line up and packs up to a similar size as the rest.
Fit
This model fits great over my typical load out and the hood is especially comfortable over my climbing helmet. It also feels an inch or two longer than the above models which feels like it will provide a little more heat retention.
Features
Adjustable, climbing-helmet-compatible hood
Lightweight stretch cuffs
Two-way front zipper
Insulated wind flap
Drawcord hem
Two zip hand pockets, zip chest pockets, two internal drop pockets and internal stretch media pocket (no internal port though and really small size)
The Outdoor Research Perch Belay Parka uses industry leading PrimaLoft® Gold 100% polyester insulation 200 g/m2 body, 160 g/m2 lower body and lower sleeves. This is the best performing synthetic insulation in the line up and Outdoor Research definitely stuffed this jacket with more of it than any of the other models being tested.
Shell
This piece uses Pertex® Endurance 2L, 100% nylon 20D melange body and Pertex® Microlight, 100% nylon 22D ripstop lining. This is the highest performing shell material in this line up (also used in next jacket).
Weight/Compressability
30.4 oz. / 860 grams. This is the heaviest model in the line up but is also most likely the warmest of the bunch. It also has a somewhat innovative internal stuff sack design I’ve never seen before. Basically a Velcro “hidden pocket” in the lower back inverts into a stuff sack. Final stuffed size is probably 20-30% larger than others in this line-up with the obvious trade off being more warmth.
Fit
This model fits great over my typical load out and the hood is especially comfortable over my climbing helmet. It also feels an inch or two longer than the first two models which feels like it will provide a little more heat retention.
*Disclaimer, when I asked Patagonia for a belay jacket for review they sent me the amazing down insulated Fitz Roy. Comparing down to synthetic belay jackets is like comparing apples to oranges when it comes to cost, weight, and compressability, so I am including the specs on the DAS even though I do not have one to fully review (yet)… the DAS should certainly be represented in this line up!
Insulation
The Patagonia DAS Parka uses 120-g PrimaLoft® Silver Insulation Hi-Loft and then adds a layer of 60-g PrimaLoft® Gold Insulation Eco in the chest, abdomen and back to offer maximum thermal efficiency and water repellency.
Shell
Like the Outdoor Research Perch Belay Jacket this one uses the lightweight, nylon ripstop Pertex® Endurance shell with PU coating. It is durable, water-resistant, windproof and treated with a DWR (durable water repellent) finish.
Weight/Compressability
23.6 oz. / 669 grams. This is the lightest model in the line up and hardest for me to fairly compare since I have not sourced one yet. Based on what I have researched I’ll say for the weight this one might be the warmest non-down belay jacket out there. However it saves weight by using a little less insulation. When compared side by side with the Outdoor Research Perch Belay jacket the numbers look like this:
Patagonia DAS vs Outdoor Research Perch
180gr/120gr vs 200gr/160gr
Mix of Primaloft Gold & Silver vs 100% Primaloft Gold
Fit
This model fits great over my typical load out and the hood is especially comfortable over my climbing helmet. It also feels an inch or two longer than the first two models which feels like it will provide a little more heat retention.
Features
Helmet-compatible hood with visor and single-pull drawcord to adjust overall volume and peripheral vision
Full-length 2-way zipper with internal, insulated wind flap and fold-over zipper garage for next-to-skin comfort
Pockets: two zippered, insulated handwarmers; two large interior mesh drop-ins; one exterior zippered chest
Elasticized cuffs and discreet drawcord at drop hem seal in warmth
Stuffsack included
Summary
These are all really nice offerings in the ever growing field of belay jackets. I look forward to getting some field time in each of them to pull out the minutia that sometimes helps one product edge out another. If you’d like to look for other consumer opinions on them or try one out yourself you can purchase directly off Amazon at these links, and doing so helps support this blog:
I hope this info helps you select the right belay jacket for the upcoming winter! If I missed your favorite model or you have any questions or comments please let me know below!
See you in the mountains,
Northeast Alpine Start
Disclaimer: All of the products listed above were provided at no cost for purposes of review. All opinions stated are my own. Affiliate links above help support this blog.
The Black Diamond Alpine Start Hoody protects against wind and light rain and is so ultra-light and pack-able that there are few reasons why you should not pack this little piece of insurance on every outing.
Black Diamond Alpine Start Hoody Review- photo from blackdiamondequipment.com
Last summer my long time friend and climbing partner Tom turned me onto this piece which coincidentally shares its namesake with my own website. We were exploring a back-country cliff during the peak of black-fly season and despite it being a rather warm & humid early summer day he donned this jacket to provide some protection from the onslaught of blood-suckers.
Black flies attempt to carry Tom away
I remarked that he must be sweating like crazy wearing a hoody like this in such warm weather and he re-assured me the piece was so light & breathable that he was actually quite comfortable. He took the majority of the leads that day while I donated a pint or two of blood to the insect world.
With that history in mind I was quite enthusiastic when Black Diamond provided a sample for review.
Fresh out of the plastic
At home impressions were quite positive. For starters this jacket is ridiculously light-weight weighing in at 7 3/4 ounces on my home scale!
That’s light!
Black Diamond lists 7.1 ounces (202 grams) in their Technical Specs.
In addition to being one of the lightest soft shell hoodies on the market the Black Diamond Alpine Start Hoody is also super pack-able and easily stuffs inside its reversible zippered chest pocket!
Pack-ability!
When crushed into a ball its the size of a youth softball. It also has a convenient sewn loop to allow attaching it to the back of your harness just in case the clouds get a little darker.
Extra protection when you decide to leave your pack at the base of the climb
My first real test of the jacket this July on an ascent of that classic east coast alpine climb, The Whitney Gilman Ridge. Dry cool air and a 15-20mph breeze led to quite comfortable climbing conditions, until we got held up by a slow moving party on the notorious “pipe pitch”. We weren’t going anywhere for awhile so out came the hoody’s while we waited for the traffic to clear.
It was serendipitous that I was climbing with Tom, the guy who preached about this jacket to me last summer. He had upgraded to a new color of the same jacket!
So what is this thing made of? Well technically it is “Schoeller® stretch-woven with NanoSphere® Technology (80 g/m2, 93% nylon, 7% elastane)”.
Since most people probably don’t know what exactly that means let me break it down. First off, this Schoeller® fabric is super thin. The 7% elastane gives the fabric a noticeable stretchy feel.
Second, the NanoSphere® Technology is a high end Durable Water Repellent (DWR) treatment that also boasts a “self-cleaning” property. You can read more on this technology here. This jacket is clearly not intended to be water-proof but it certainly has shed light rain and mist on a few blustery days while climbing in Huntington Ravine and on Cathedral Ledge. At 7 ounces I consider this a fair trade off and when the forecast calls for a significant chance of rain I will pack a more substantial shell like the waterproof Eastern Mountain Sports Storm Front Jacket.
But the breath-ability! This is the most breath-able wind shell I have tested. So breath-able that it is wearable on hot & humid days as a bug protection layer! This feature makes it ideal for high output activity in blustery conditions. Trail running, fast-hiking, XC skiing, peak-bagging, or any time you want to go fast & light! And the weight! Even if the forecast looks like this:
Not the North East
When it only weighs 7 ounces, and packs into the size of a softball, there’s really no question in my mind like “should I bring this?” It’s been living in my summer climbing pack all season and I’ve been surprised at the amount of times I’ve actually dug it out to be more comfortable, rain or shine!
Ok, let’s finish looking at some of the smaller but important features and move on to our summary shall we?
The Hood
It fits over a helmet as shown in the photo above, but also thanks to a one-hand-adjustable shock cord & cord lock on the back it can be cinched down to conform to your melon without a helmet on as well. This tightening option also helps the hood turn with your gaze so you don’t get blind-sided by a wild moose on the loose.
Well fitted hoodAdjustable helmet compatible hood
The only pocket on this ultralight piece is the reversible chest pocket that doubles as a stuff sack when turned inside out. A reversible zipper and sewn nylon loop add utility and convenience.
Chest pocket reverses for easy storage
My first concern with this jacket was the lack of an adjustable cuff at the wrist. I’m sure this saved a small amount of weight but when climbing I really like a snug wrist cuff.
Elastic wrist bands
I have a pretty small to medium sized wrist and I found this cuff to be a bit too loose. My solution is to just slide it up my forearm until it feels snug. It’s definitely a utilitarian type look, and I’d prefer a traditional velcro adjuster in future models.
I measured the back length at 28 inches, and given the stretchy characteristic of the Schoeller® fabric it is sufficiently long enough to stay tucked into my harness even when making long over the head reaches.
Back length of size large = 28 inchesTopping out Whitney Gilman Ridge on Cannon Cliff, Franconia Notch State Park, New Hampshire
Summary
Tom was right. This is an ingenious piece and it will be a part of my kit for as long as it’s produced. It’s not waterproof, but that’s ok, it’s not meant to be. Think of it as a highly breathable wind shirt with a hood. Able to shed light precipitation. Able to cut cold breezes when you thought August on Cannon would be t-shirt weather. Able to pack up into a a neat little package and live on the back of your harness for those “just in case” type days. From cool weather running & cycling to fast & light alpine climbing this is a well designed piece of gear. You should check it out for yourself!
Black Diamond Alpine Start Hoody Review
Thanks for reading! If you enjoyed this review please like, share, subscribe, comment, or just send me some positive karma.
See you in the mountains,
-Northeast Alpine Start
Disclosure: Black Diamond provided this sample for the purposes of this review and this post contains affiliate links which support the content created here.
On a particularly hot & humid day last summer I came across a fellow guide sporting a long sleeve hoodie while guiding a couple of clients up the scorching Whitehorse Slabs. I thought he must be cooking in a long-sleeve hoodie (hood up) but he assured me he was quite comfortable. The garment in question? The Patagonia Men’s Sunshade Technical Hoodie.
Interestingly this piece is marketed towards “flats fishing”. I’ll be honest and say I wasn’t sure what that was so I googled it. One of the first images was from http://www.flyfishingpatagonia.com:
So think tropic, hot, no shade, UV reflection from above & below. Got it?
Here’s Patagonia’s official description:
“On tropical Pacific atolls, the only thing more ferocious than a feeding GT is the sun. Fortunately, our Sunshade Technical Hoody, with its ultralight 3.54-oz polyester double-knit fabric and 25-UPF sun protection, offers full upper-body coverage and a cool, airy feel. Thumb holes pull the sleeves down to cover hands, built-in sun mask and hood fit easily over a baseball cap, reinforced stretch-woven inner forearms and side panels protect against abrasion and a convenient zippered pocket holds a few essentials. The Sunshade proudly flies a heat-transfer Fitz Roy Tarpon logo on the back. When the flats heat up, don’t wilt. Just throw on a Sunshade and keep fishing.”
So what is this piece doing on climbing guides in the White Mountains of New Hampshire at the 44th parallel north? It is the perfect hot weather piece with the added un-advertised benefit of being BLACK FLY PROOF!
Today was my last test run before I wanted to post up about it. We hiked 2 miles to an outback cliff as the mercury rose to 80 degrees. Humidity was mild given early season but we still worked up a sweat reaching the cliff. As soon as we dropped packs at the base of the climb we were swarmed by the black flies Mt. Chocurua is known for. It reminded me of a particularly trying day on nearby White Ledge last June. Here’s a pic to show the ferocity of these beasts on this mountain:
Black flies attempt to carry Tom away
Despite still being warm from the hike in just my EMS Techwick T-shirt I threw the Patagonia Sunshade Hoodie on while we flaked out the rope and racked up. Instant relief from the onslaught of insects was had as the super thin hood fits easily under my climbing helmet keeping these blood suckers out of my ears. I also felt like I was cooling down faster than if I had just stayed in my t-shirt on this south facing cliff.
Top of the second pitch of “Living The Dream”, Carter Ledge, Mt. Chocurua White Mountains NH- photo by Matty B.
I wore it while leading all 4 pitches of this moderate south facing slab route and for the whole hike out. At just under 7 ounces this hoodie will be a staple in my summer guiding kit from now to cooler Fall temps.
Patagonia has made a few small changes to this seasons model, namely;
The chest pocket now has a vertical zipper instead of horizontal.
The hood is a little more relaxed with a button that allows some adjust-ability. This is a great change as the older model that I tested is quite snug at the neck which can make you feel a bit “closed in” when working really hard. The new design looks like a definite improvement.
They dropped the MRSP $10! This piece retails for $79 which I think is a great value for a piece backed by Patagonia’s excellent Ironclad Guarantee.
If you are fair skinned, or just like to “stay cool” on hot sweltering days you should take a look at this piece! You can buy one directly from Patagonia here or from Backcountry.com below! Also available in womens (without the chest pocket)!
PATAGONIA MEN’S SUNSHADE TECHNICAL HOODY- photo by Matty B.
Disclaimer: I bought this item with my own money from Moosejaw since the new one wasn’t out yet and EVERYONE was sold out of the old one. So… I guess I don’t need a disclaimer. I liked it so much I couldn’t wait to review it! Affiliate links help support this blog.
With a half dozen ski tours completed I’m finally ready to share my opinion on this new jacket from Patagonia’s extensive line of ski & snowboard clothes. The Patagonia Men’s Reconnaissance Jacket is obviously built for solid days in the back-country. Let me show you why!
PATAGONIA MEN’S RECONNAISSANCE JACKET Review
Breath-ability:
Designed for “high output search missions” this is a hybrid style of shell, combining the extreme breath-ability of soft-shell fabric with 100% waterproof breathable 3 layer stretch fabric. So what does this mean? You can keep this shell on over your base layer longer while skinning in those (should I wear my shell or not?) type conditions. Two classic examples would be high output uphill travel with cold wind chills (hello Mount Washington) or high output uphill travel with misty/wet conditions (hello again Mount Washington). The point is this shell jacket has a higher breath-ability than any true back-country shell jacket I have worn. While not waterproof throughout, this design is optimal for crushing uphill mileage when all the precipitation you are dealing with is of the frozen variety.
Still comfortable after skinning up to HoJo’s
Freedom of Movement:
While soft-shell fabrics typically have a fair amount of stretch the 3 layer waterproof material used in the construction of this jacket also has a fair amount of stretch. This two-way stretch allows complete freedom of movement. The material feels soft to the touch and this stretch through out is most noticeable when your well fitted ski pack straps are all cinched down in preparation for descent. Shoulder straps, waist belt, and sternum strap all under tension, this jacket conforms with every twist of the torso as you find your line though steep powder or icy bumps and water bars (hello again Mount Washington).
Fit:
According to Patagonia this has a “Regular Fit:Neither slim nor over-sized. Regular-fitting technical garments may be worn over heavier mid-layers.” With a 40 inch chest I went with the medium and the fit is great on my 5’9″ 175 pound build. Because it is a regular fit I can easily wear my base layers (synthetic T and PowerStretch Hoodie) under it, adding a Primaloft sweater in very frigid conditions.
Features/Convenience/Technology:
There is a lot more to talk about here. Let’s start with the fully taped seams inside.
While Patagonia points out this helps to keep moisture out I’d also wager it will also help with the longevity of the garment. Modern taped seams like this give the inside of the jacket a very nice finished look.
Pockets:
Yes, you can put a lot of thought into pockets. We start with 2 generously sized hand warmer pockets. Then add two chest pockets, one with an internal zippered stash pocket perfect for your smartphone (a small port allows you to pass headphones through). Inside there is also a large “drop in” pocket for goggles or gloves. Finally a sleeve pocket is perfect for stashing my compass/clinometer and lip balm. All zippers used are high quality urethane coated zippers.
Recco:
On the back of the neck the jacket has a Recco Avalanche Rescue Reflector. While this technology doesn’t replace carrying a beacon in the back-country it does add another chance at being found if caught in-bounds or anywhere a trained rescue group employs Recco search units.
Here’s a short manufacturer video highlighting many of the features I have commented on:
Bottom Line:
This is a very high end shell designed with a fairly specific goal in mind. A wind-proof highly water resistant shell that can handle the exertion of both uphill skinning and challenging downhill back-country skiing. The fact that it is produced by a company well known for its social and environmental responsibility is icing on the cake. If you are in the market for a shell for skiing or riding, especially for back-country trips, I can highly recommend you take a look at this choice option! You can find the best price on Amazon right here!
Tuckerman Ravine 2/15/16
Thanks for reading!
See you in the mountains,
NEAlpineStart
Disclaimer: While this item was provided by Patagonia for the review the opinions I’ve formed over the last two months are indeed my own. This post contains affiliate links that help support this blog.
![here](http://<a href="http://www.avantlink.com/click.php?tt=cl&mi=10083&pw=207451&url=http%3A%2F%2Fwww.patagonia.com%2Fhome" target="_blank"> https://www.backcountry.com/patagonia-sunshade-technical-hooded-shirt-long-sleeve-mens <img src="http://www.avantlink.com/tpv/10083/0/165967/207451/-/cl/image.png" width="0" height="0" style="visibility: hidden; border: none !important; margin: 0px !important;" alt="" /> </a>){kind=link}
![womens](http://<a href="http://www.avantlink.com/click.php?tt=cl&mi=10083&pw=207451&url=http%3A%2F%2Fwww.patagonia.com%2Fhome" target="_blank"> https://www.backcountry.com/patagonia-sunshade-hooded-shirt-long-sleeve-womens?s=a <img src="http://www.avantlink.com/tpv/10083/0/165967/207451/-/cl/image.png" width="0" height="0" style="visibility: hidden; border: none !important; margin: 0px !important;" alt="" /> </a>){kind=link}